Bench-Top Stainless Steel Gas Extraction Hood YR05820-SS
Compact AISI 304 · designed for point-of-use extraction on the workbench
The Kalstein YR05810-SS is a compact bench-top gas extraction hood in AISI 304 stainless steel. Designed to sit directly on the workbench, it delivers 500-700 m³/h axial extraction at 0.4-0.6 m/s face velocity — ideal for spot chemistry, small-scale sample preparation and QC where a full walk-in hood is not needed.
Interactive tour · Explore the YR05810-SS
Every component, engineered for extraction
Six precision-engineered systems working together — press play for a guided tour or click any point on the hood to inspect it in detail.
Inspectable components
- Top duct · Ø 250 mmExtraction
Top-mounted port directs captured vapors to external extraction.
- Control panelControl
Compact controls for fan, lighting and instrument power.
- Chamber lightingIllumination
Sealed lamp keeps the bench-top chamber clearly visible.
- Tempered sliding sashSafety
Front glass barrier helps separate the operator from chemistry.
- Multifunction socketsElectrical
Integrated sockets power small bench instruments.
- AISI 304 internal chamberMaterials
Stainless internal chamber designed for bench-top installation.
Key features
- Compact bench-top format — no ground installation required
- Full stainless steel AISI 304 body — acid and gas resistant
- Face velocity 0.4-0.6 m/s in three modes
- Extraction 500-700 m³/h · axial blower · top exhaust
- Stainless AISI 304 worktop with fluid-containment lip
- LED 8 W illumination · noise ≤ 58 dB
Triple protection · engineered layers
Operator protection
Bench-top design captures vapors at the source through a Ø 250 mm top duct, isolating the operator during small-scale chemistry.
- Front sash
- Top duct exhaust
- Low-flow alarm
- Face velocity
- 0.5 m/s
- Duct diameter
- Ø 250 mm
- Noise
- ≤ 58 dB
AISI 304 durability
Fully stainless internal chamber built for daily solvent, acid and base handling.
- AISI 304 chamber
- Sealed lighting
- Tempered sash
- Material
- AISI 304
- Illumination
- LED 8 W
- Tempered glass
- 5 mm
Compact bench installation
Small footprint fits crowded benches and satellite labs without permanent ducting work.
- Bench-top
- 3 m flexible duct
- Multi-function sockets
- External width
- 900 mm
- Duct length
- 3 m
- Power
- 220 V
Airflow modes · what happens in every direction
- Low — Low airflow · 0.3 m/s
Gentle extraction for teaching demonstrations.
- Medium — Medium airflow · 0.5 m/s
Standard operating point for bench-top chemistry.
- High — High airflow · 0.8 m/s
Maximum extraction for volatile solvents.
- Auto — Automatic purge cycle
Clears residual vapors before shutdown.
Technical specifications
| Model | YR05810-SS |
|---|---|
| Construction | AISI 304 stainless steel · bench-top |
| Face velocity | 0.4 – 0.6 m/s |
| Extraction rate | 500 – 700 m³/h |
| Noise level | ≤ 58 dB |
| Illumination | LED 8 W |
| Worktop | Stainless steel AISI 304 |
| Front window | Tempered safety glass |
| External dimensions | 900 × 700 × 1350 mm (bench-top) |
| Power supply | 220 V / 50-60 Hz |
Applications
- Point-of-use lab chemistry
- Small-scale sample prep
- Titration and pipetting with volatiles
- Educational QC labs
- Field and mobile laboratories
Real-world use cases · guided workflows
Teaching laboratory
Bench-top hood for chemistry teaching and student practices.
- Open sash
- Start fan
- Perform demonstration
- Discuss safety with students
- Shut down and log
Small-volume R&D
Micro-scale reactions and sample handling in research labs.
- Set up reaction
- Add reagents
- Monitor progress
- Quench and clean
- Store residues
Field / satellite lab
Portable extraction in satellite labs with limited ducting.
- Connect flexible duct
- Verify airflow
- Perform procedure
- Purge chamber
- Disconnect and store
Ideal for applications in
Where the YR05810-SS performs
Explore each field the YR05810-SS was engineered for — click any industry to reveal the specific benefits, key metrics and how the hood supports the workflow.
Chemical laboratories
Solvent transfers, acid handling and general synthesis with continuous vapor extraction.
key benefits
- Solvent & acid handling
- Dilutions and titrations
- Reflux and distillation set-ups
- Max velocity
- 0.8 m/s
- Stainless
- AISI 304
- Integrated
- Bench installation
Pharmaceutical industry
Formulation R&D, weighing of active ingredients and small-scale synthesis under contained extraction.
key benefits
- API weighing
- Formulation R&D
- Small-batch synthesis
- External mm
- 1200×650
- Sockets
- 3×
- Outlet mm
- Ø 250
Research & academic labs
Teaching demonstrations and research protocols requiring safe handling of volatile reagents.
key benefits
- Undergraduate teaching
- Postgraduate research
- Prototype chemistry
- Tempered glass
- 5 mm
- Internal mm
- 1000×550
- Fan
- 110 W
Clinical & diagnostic labs
Processing of clinical reagents, stains and fixatives with operator protection against fumes.
key benefits
- Histology fixatives
- Reagent preparation
- Sample staining
- 60 Hz
- 220 V
- Cleanable
- AISI 304
- Integrated
- Tap
Industrial QC labs
Quality control of raw materials and finished products with continuous chemical exhaust.
key benefits
- Incoming raw-material QC
- Finished-product testing
- Stability studies
- Flexible duct
- 3 m
- Wall
- 1.0 mm
- H mm
- 1000
Fast quotation · 15 seconds
Add the YR05810-SS bench-top hood
Compact stainless steel extraction hood shipped with duct kit and installation guide.
Frequently asked questions
Does it need external ducting?
Yes. Connect the top exhaust to a dedicated duct discharging above the roof or to an activated-carbon filtration cassette for filtered recirculation.
How is it different from the YR05820-SS?
YR05820-SS is a floor-standing hood (1200 mm wide); YR05810-SS is a compact bench-top (900 mm) with the same stainless-steel construction but lower footprint and extraction rate.
Is it suitable for perchloric acid?
For occasional use with proper duct washing, yes. For continuous perchloric digestions choose the larger YR05820-SS with a perchloric-rated ducting system.
How much space does it need?
Just 900 × 700 mm of bench surface plus 1350 mm vertical clearance for the sash and exhaust duct.